Distance between Cisco TX and Abilene TX

The distance from Cisco to Abilene is 45 miles by road including 39 miles on motorways. Road takes approximately 48 minutes and goes through Baird, Clyde and Putnam.

Click here to load the interactive map
Compare this route in other services:
City
Town
Village
Hamlet
Motorway
Primary
Secondary
Unclassified
Point Distance Time Fuel
Cisco 0 mi 0:00 00 min 0.0 gal
TX 206 I 20 12 mi, 12 min
Putnam 12 mi 0:12 12 min 0.4 gal
I 20 12 mi, 12 min
Baird 25 mi 0:24 24 min 0.8 gal
I 20 5 mi, 05 min
Clyde 30 mi 0:30 30 min 1.0 gal
I 20 16 mi, 18 min
Abilene 45 mi 0:48 48 min 1.1 gal

Frequently Asked Questions

How much does it cost to drive from Cisco to Abilene?

Fuel cost: 6 USD

This fuel cost is calculated as: (Route length 45.4 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.93 USD / gal)

You can adjust fuel consumption and fuel price here.

How long is a car ride from Cisco to Abilene?

Driving time: 48 min

This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.

  • 24 mi with a maximum speed 62 mph = 22 min
  • 21 mi with a maximum speed 50 mph = 24 min

The calculated driving time does not take into account intermediate stops and traffic jams.

How far is Cisco to Abilene by land?

The distance between Cisco and Abilene is 45.4 mi by road including 38.5 mi on motorways.

Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Cisco and Abilene respectively.

How far is Cisco to Abilene by plane?

The shortest distance (air line, as the crow flies) between Cisco and Abilene is 44.1 mi.

This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Cisco and Abilene respectively. Actual distance between airports may be different.

How many hours is Cisco from Abilene by plane?

Boeing 737 airliner needs 5 min to cover the distance of 44 mi at a cruising speed of 497 mph.

Small plane "Cessna 172" needs 19 min to flight this distance at average speed of 136 mph.

This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.

How long is a helicopter ride from Cisco to Abilene?

Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 17 min to cover the distance of 44 mi at a cruising speed of 149 mph.

Popular "Robinson R44" needs 20 min to flight this distance at average speed of 130 mph.

This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.

What city is halfway between Cisco and Abilene?

The halfway point between Cisco and Abilene is Baird. It is located about 2 mi from the exact midpoint by road.

The distance from Baird to Cisco is 25 mi and driving will take about 24 min. The road between Baird and Abilene has length 21 mi and will take approximately 24 min.

The other cities located close to halfway point:

  • Clyde is in 30 mi from Cisco and 16 mi from Abilene

Where is Cisco in relation to Abilene?

Cisco is located 44 mi east of Abilene.

Cisco has geographic coordinates: latitude 32.38819, longitude -98.97923.

Abilene has geographic coordinates: latitude 32.44645, longitude -99.73335.

Which highway goes from Cisco to Abilene?

The route from Cisco to Abilene follows I 20.

Other minor sections pass along the road:

  • I 20-R Business: 5 mi
  • TX 206: 2 mi
The distance between Cisco and Abilene is ranked 4,201st in the ranking popularity.
Have any questions? Contact us!