Distance between Conover NC and Burnsville NC
The distance from Conover to Burnsville is 81 miles by road including 44 miles on motorways. Road takes approximately 1 hour and 27 minutes and goes through Hickory, Hildebran, Icard and Spruce Pine.
| Shortest distance by air | 62 mi ✈️ |
| Car route length | 81.4 mi 🚗 |
| Driving time | 1 h 27 min |
| Fuel amount | 2.8 gal |
| Fuel cost | 10.9 USD |
| Point | Distance | Time | Fuel | |
| Conover | 0 mi | 00 min | 0.0 gal | |
|
I 40 7 mi, 06 min
|
||||
| Hickory | 7 mi | 06 min | 0.2 gal | |
|
I 40 6 mi, 05 min
|
||||
| Icard | 14 mi | 12 min | 0.4 gal | |
|
I 40 37 mi, 35 min
|
||||
| Garden Creek | 51 mi | 48 min | 1.7 gal | |
|
US 221 2 mi, 02 min
|
||||
| Toms Creek | 53 mi | 51 min | 1.8 gal | |
|
US 221 3 mi, 03 min
|
||||
| Woodlawn | 57 mi | 54 min | 1.9 gal | |
|
US 221 NC 226 8 mi, 08 min
|
||||
| Grassy Creek | 65 mi | 1 h 03 min | 2.2 gal | |
|
NC 226 4 mi, 04 min
|
||||
| Spruce Pine | 68 mi | 1 h 08 min | 2.3 gal | |
|
NC 226 US 19E 2 mi, 03 min
|
||||
| Estatoe | 71 mi | 1 h 11 min | 2.4 gal | |
|
US 19E 13 mi, 15 min
|
||||
| Burnsville | 84 mi | 1 h 27 min | 2.8 gal | |
Hotels of Burnsville
Frequently Asked Questions
How much does it cost to drive from Conover to Burnsville?
Fuel cost: 10.9 USD
This fuel cost is calculated as: (Route length 81.4 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.93 USD / gal)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Conover to Burnsville?
Driving time: 1 h 27 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 13 mi with a maximum speed 68 mph = 11 min
- 30 mi with a maximum speed 65 mph = 28 min
- 4 mi with a maximum speed 56 mph = 4 min
- 17 mi with a maximum speed 55 mph = 18 min
- 7 mi with a maximum speed 50 mph = 7 min
- 5 mi with a maximum speed 50 mph = 6 min
- 4 mi with a maximum speed 45 mph = 6 min
- 1 mi with a maximum speed 35 mph = 1 min
- 1 mi with a maximum speed 31 mph = 1 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Conover to Burnsville by land?
The distance between Conover and Burnsville is 81.4 mi by road including 44.1 mi on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Conover and Burnsville respectively.
How far is Conover to Burnsville by plane?
The shortest distance (air line, as the crow flies) between Conover and Burnsville is 62.1 mi.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Conover and Burnsville respectively. Actual distance between airports may be different.
How many hours is Conover from Burnsville by plane?
Boeing 737 airliner needs 7 min to cover the distance of 62 mi at a cruising speed of 497 mph.
Small plane "Cessna 172" needs 27 min to flight this distance at average speed of 136 mph.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Conover to Burnsville?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 25 min to cover the distance of 62 mi at a cruising speed of 149 mph.
Popular "Robinson R44" needs 28 min to flight this distance at average speed of 130 mph.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Conover and Burnsville?
The halfway point between Conover and Burnsville is Garden Creek. It is located about 10 mi from the exact midpoint by road.
The distance from Garden Creek to Conover is 51 mi and driving will take about 48 min. The road between Garden Creek and Burnsville has length 30 mi and will take approximately 39 min.
The other cities located close to halfway point:
Where is Conover in relation to Burnsville?
Conover is located 62 mi east of Burnsville.
Conover has geographic coordinates: latitude 35.70635, longitude -81.219.
Burnsville has geographic coordinates: latitude 35.91718, longitude -82.29968.
Which highway goes from Conover to Burnsville?
The route from Conover to Burnsville follows I 40.
Other minor sections pass along the road:
- NC 226: 24 mi
- US 19E: 14 mi
- US 221: 12 mi
- NC 80: 1 mi